GLUCOSE REAGENT STRIPS

PRODUCT DESCRIPTION

Glucose Reagent strips are a disposable plastic reagent strip for the determination of glucose. A semi-permeable membrane is employed to serve as a barrier to prevent blood cells from entering into the reagent pad area. Each strip is stable and ready to use when removed from the storage vial.

WARNINGS AND PRECAUTIONS

Glucose strips are for in-vitro diagnostic use.

SPECIMEN COLLECTION AND PREPARATION

Glucose Reagent Strips are intended for use with serum, heparinized plasma, or whole blood. Blood glucose undergoes glycolysis rapidly after drawing. To prevent loss due to glycolysis use blood samples immediately.

SPECIFICATIONS

1. Range 50-400 mg/dl

2. Specimen serum, heparinized plasma or whole blood

3. Sample Volume 50-100µl

4. Reaction Time 60 seconds

5. Storage Room temperature below 30°C (86°F)

LIMITATIONS OF PROCEDURE

Whole blood with fluoride as a preservative should be avoided. Hematocrits greater than 55% can cause lower results.

STORAGE AND HANDLING

Reagent strips should be stored in the vial in a cool, dry place. Avoid excessive humidity, temperature extremes, and direct sunlight. The vial should be stored tightly capped. Remove desired number of strips and recap immediately. Do not handle reagent pad area.

TEST PROCEDURE

Proper timing is critical for this technique.

1. Apply 1 large drop of sample to the pad.

2. Wait 30 seconds.

3. Wipe sample off with a tissue. USE MODERATE PRESSURE EVENLY ON THE REAGENT PAD AREA. REMOVE ALL EXCESS SAMPLE.

4. Wait an additional 30 seconds.

5. Compare color of the pad with the color chart to obtain Glucose value

AVAILABILITY

Glucose reagent strips are available in vials of 25 strips.

FOR TECHNICAL ASSISTANCE CALL: 1-800-236-6180